Back to Back Issues Page
PWL#055B - Gas Tungsten Arc Welding, Guidelines, Handbook, Tips, Resources, Articles, Information...
March 17, 2008

PWL#055B - Gas Tungsten Arc Welding, Guidelines, Handbook, Tips, Resources, Articles, Information, Procedures and more...

Mid March Bulletin

17 March 2008 - Resources on GTAW (TIG) - Bulletin 23


Please find here our new Mid Month Bulletin that we offer with the purpose of providing useful online information easily accessible to our readers, either now or at some later date.

Therefore may we suggest that you save or bookmark this page for your future reference.

For any questions, comments or feedback please send a message to us by e-mail.

Click on Contact Us.

* * *

For a general introduction to this subject we would like to refer you to our page:
Tig Welding Tips

An Article on Hot Wire TIG was published (7) in Issue 50 of Practical Welding Letter for October 2007. Click on PWL#050 to read it.

An Article on Orbital Welding was published (7) in Issue 51 of Practical Welding Letter for November 2007. Click on PWL#051 to read it.

Resources on Gas Tungsten Arc Welding (TIG)(23)

MILLER Guidelines to Gas Tungsten Arc Welding

MILLER TIG Handbook - 12 Downloadable Chapters - 88 pages

TIG Welding for Tool, Die and Mold Repair: an Overview

TIG Welding Resources

Precision TIG Series
Part 1: Arc Performance content/tigseriespower.asp

Part 2: Value Added Features

Part 3: Design Innovations Lead to Fast and Easy Set-Up

Part 4: Rated Output, Current Range & Input Current

Part 5: Design, Construction and Testing

TIG Welding Aluminum

TIG Welding

Orbital Tig Welding

Hobart TIG Welding Tips

ESAB - Lesson 6 - Metals for the GMAW, GTAW, AND SAW Processes

For a free copy of the new guide email

* * *


Visit our New pages on Brazing Heating and on Brazing Aluminum that were recently added to our Website.

Links to the Mid Month Bulletin Pages are listed in the regularly updated page on
Welding Resources. (Opens a new Page).

We urge our readers to Bookmark or to subscribe to our Welding Site Blog by clicking on the orange buttons under the NavBar in each Website page.
You may also click periodically on the Welding Blog button in the NavBar.

In case you missed the last Practical Welding Letter, Issue No. 55 of March 2008, you will be able to obtain it by clicking on PWL#055. (Opens a new Page).

Ooops! I goofed...
I hope I did not misled anybody... but still I am not completely sure.
What happened is that in my page on Brazing Joint Design
I wrote a note that a few pages on this subject with essential instructions were available from page 532 of Chapter 12 in AWS Welding Handbook, Ninth Edition. This is all true.
My mistake was that I addressed my readers to Volume 3, whereas I should have sent them to Volume 2...The wrong reference was since corrected.
If anyone fell in the trap I am terribly sorry. Please let me know.

Hardness Testing
made simple

If you think that this page might be useful, you are invited to forward it to a friend.
If you received this page from a friend, please note that you can get at no cost every new issue of Practical Welding Letter, by clicking on Subscription (Opens a new Page).
You will also receive a bonus book on
"Practical HARDNESS TESTING made simple".

Please accept our Invitation and contribute from your thoughts and experience by visiting our new page reachable by clicking on Welding Talk.
Your comments are welcome.

Important Announcement

Where are you looking for Materials Information?

Now you can easily assemble your own Encyclopedia Online! You will thus enjoy a huge advantage not available to those unaware of this opportunity. See the page on Metals Knowledge. Act now to realize your benefit!

Click on the following image to watch the SBI! TV Show!



Build It!

Click on this Logo NOW!

Copyright (©) 2008, by Elia E. Levi and
All Rights Reserved See you next time...

Back to Back Issues Page