Mid Month Bulletin 26

PWL#058B - Resources on Waterjet Cutting and on Abrasive Waterjet Cutting, Overview, References, Articles, Basic Technology, Machines, Video and more...

Mid June Bulletin

Introduction

Please find here our new Mid Month Bulletin that we offer with the purpose of providing useful online information easily accessible to our readers, either now or at some later date.

Therefore may we suggest that you save or bookmark this page for your future reference.

For any questions, comments or feedback please send us a message by e-mail. Don't use REPLY, use Contact Us.

A short introduction to this process was presented in section 7 of issue 47 of Practical Welding Letter for July 2007. See PWL#047.

For a general introduction to this subject we would like to refer you to our new page:
Abrasive Water Jet Cutting.

Resources on Waterjet Cutting and on Abrasive Waterjet Cutting

Waterjet Seminar - Overview (30 pages)
http://www.flowcorp.com/uploadedFiles/WJ%20Overview%20White%20Paper.pdf

Waterjet Web Reference - Many Pages, Links, Pictures http://www.waterjets.org/

Omax - Many pages and links to browse through
http://www.omax.com

Flowcorp - Linked Pages, Reference, Video, Brochures, Downloads
http://www.flowcorp.com

Abrasive Water Jet Cutting of Titanium
http://www.tifab.com/pdf/WaterJetCutting.pdf

Abrasive Water Jet Cutting - PPT Presentation
http://www.media.mit.edu/physics/pedagogy/fab/manuals/MIT-ml-waterjet-15oct01a.ppt

Cutting with the Jet Set - Forming & Fabricating
http://www.media.mit.edu/physics/pedagogy/fab/manuals/NOTES-waterjet-info-11oct01-cuting-with-the-jet-set.pdf

Articles:

Pumps for abrasive jet cutting (sept. 10, 2003)
http://www.thefabricator.com/WaterjetCutting/WaterjetCutting_Article.cfm?ID=694

Fixturing for abrasive jet machining (Jan 10.2006)
http://www.thefabricator.com/WaterjetCutting/WaterjetCutting_Article.cfm?ID=1238

Economic considerations when purchasing a jet cutting machine (Feb. 13, 2007)
http://www.thefabricator.com/WaterjetCutting/WaterjetCutting_Article.cfm?ID=1545

Designing for abrasive waterjet fabrication (April 10, 2007)
http://www.thefabricator.com/WaterjetCutting/WaterjetCutting_Article.cfm?ID=1597

Recent developments in abrasive jet software (June 12, 2007)
http://www.thefabricator.com/WaterjetCutting/WaterjetCutting_Article.cfm?ID=1655

Pumping up the waterjet power (Dec 11, 2007)
http://www.thefabricator.com/WaterjetCutting/WaterjetCutting_Article.cfm?ID=1812

Maximizing waterjet cutting profit (4.15.08)
http://www.thefabricator.com/WaterjetCutting/WaterjetCutting_Article.cfm?ID=1912

Information

We urge our readers to Bookmark this page or to subscribe to our Welding Site Blog by clicking on the orange buttons under the NavBar in each Website page.
You may also click periodically on the Welding Blog button in the NavBar.

In case you missed the last Practical Welding Letter, Issue No. 58 of June 2008 you will be able to obtain it by clicking on PWL#058. (Opens a new Page).

If you think that this page might be useful, you are invited to forward it to a friend.
If you received this page from a friend, please note that you can get at no cost every new issue of Practical Welding Letter, by clicking on Subscription (Opens a new Page).
You will also receive a bonus book on
"Practical HARDNESS TESTING made simple".

Please accept our Invitation and contribute from your thoughts and experience by visiting our new page reachable by clicking on Welding Talk.
Your comments are welcome.

Where are you looking for Materials Information?

Now you can easily assemble your own Encyclopedia Online! You will thus enjoy a huge advantage not available to those unaware of this opportunity. See the page on Metals Knowledge. Act now to realize your benefit!

POWERED BY:

Click on this Logo NOW!

Copyright (©) 2008, by Elia E. Levi and
www.welding-advisers.com
All Rights Reserved

See you next time...