Resources on
Submerged Arc Welding Flux

The purpose of this Bulletin_93 is to provide links to Online Sources.

The selection of the proper flux for Submerged Arc Welding is critical.

In this process the stability of the arc depends on the correct flux being used.

The mechanical and chemical properties of the weld metal are controlled by the flux.

The quality of the weld is affected by flux control and handling.

This page is a package of information, additional to the article Submerged Arc Welding Fluxes - A Primer,
published in two Parts in PWL#126 and PWL#127 (to be issued shortly).

It could be kept handy for reference when required, to get further explanations that may be needed in special cases.

Mid February Bulletin

February 2014 - Submerged Arc Welding Flux - Bulletin_93

PWL#126B - Bulletin_93: Resources on Submerged Arc Welding Flux, Optimizing Manufacturing & Use of SAW Fluxes, Slag Metal Reactions, Slag Metal Equilibrium, Minimizing Defects in SAW, SAW Flux Recovery Equipment, Development Of Basic Agglomerated Flux, Submerged Arc Welding Process Variation and much more...

Welding Problem? Solve it! with
Help from a Welding Professional
Contact Us.

See also: SA-Welding-Tips.

The selection of an optimized Submerged Arc Welding Flux for any given application is not trivial.

Many concerns should be taken into account if satisfactory consumables (flux and filler wire) are needed.

Welding Advisers intends to offer to interested Readers practical information through the referenced above publication (The Primer) and through this page of resources, Bulletin_93.

Among the following referenced Sources, also publications from commercial enterprises are referenced to.
There is no intention to endorse or promote any of them.
However Readers can extract from them valuable information.

Before committing to specific recommendations, Readers should make sure that the proposed solutions meet their needs and purposes.

The references published in this Bulletin_93 were selected to provide useful knowledge to our Readers.

The addresses reported hereafter in this Bulletin_93 were live and correct at the time of their publication.

There is no guarantee that they will always be so, because they are administered by the sources themselves and are under their control.

Note: References to articles or other documents are given here in one of two forms.

If the links are "live" (usually underlined or otherwise highlighted) they are operated with a click of the mouse.

If they are URL's (Uniform Resource Locator), which is the analogue of an address, they begin with "http://..." or "www.".

These are not live and must be copied and pasted entirely into the browser (after having selected them with the mouse or otherwise).

If they are long they may be displayed in two or more lines.

In that case one has to care that the URL be copied completely in a single line without any space, and Enter.

If the information is important to you, you may save the downloaded selected pages in a suitable folder on your Computer for easy reference.

You are welcome to forward this Bulletin_93 Resources page to those of your friends who may profit of this information.

Resources on Submerged Arc Welding Flux

Job Knowledge
Submerged arc welding consumables - Part 1

Job Knowledge
Submerged arc welding consumables. Part 2 - specifications

Job Knowledge
Submerged arc welding consumables. Part 3 - AWS specifications

Case Studies: Optimizing Manufacturing & Use of Submerged Arc Welding Fluxes

Slag Metal Reactions during Submerged Arc Welding of Alloy Steels (11 pages)

Slag Metal Equilibrium during Submerged Arc Welding (9 pages)

Minimizing Defects in Submerged Arc Welding

Fluxes for Arc Welding and Brazing: Safe Handling and Use (3 pages)

Optimization of Conventional SAW for Severe Abrasion-Wear Hardfacing Application (8 pages)

Prediction of Element Transfer in Submerged Arc Welding (12 pages)

Submerged Arc Welding (40 pages)

Technical Handbook - ESAB (96 pages)

[Note: The Chapter on page 15 on
How to choose the right flux-wire combination
offers a few indications.]

UNIONMELT® Submerged Arc Fluxes (19 pages - click on right arrow)

Submerged arc welding with fused flux and basic cored wire for low temperature applications

Submerged Arc Wires and Fluxes (25 pages)

Submerged arc welding with fused flux and basic cored wire for low temperature applications (4 pages)

Submerged Arc Welding Booklet (32 pages) (Download from page)

Submerged Arc

Submerged Arc Consumables

Lincoln Electric Designs New Submerged Arc Flux Specifically for Wind Tower Welding

Metal Core Wires & Fluxes for Submerged Arc Welding (6 pages)

What is Submerged Arc Flux?

Submerged Arc Welding (SAW)

Standard Duty Submerged Arc Flux Recovery Equipment

Submerged Arc Welding Flux
http://www.indiamart.com/avweldtech/submerged-arc-welding-flux.html Submerged Arc Welding Flux - INCOFLUX® NT100

Submerged Arc Welding Fluxes

Submerged Arc Flux Recovery

The Basics of Submerged Arc Welding

Submerged Arc Welding Flux (9 pages)

On the elaboration of a new submerged arc welding flux for titanium (abstract)

Development Of Basic Agglomerated Flux For Submerged Arc Welding

Submerged Arc Welding for Corrosion Resistant Overlay (Presentation - 35 Frames)

Submerged Arc Welding Process Variation For Corrosion Resistance Overlays (Presentation - 20 Frames)


This publication, Bulletin_93, is not distributed by e-mail. It is reported in the Website Welding Blog.

Links to the Mid Month Bulletin Pages are listed in the regularly updated page on Welding Resources

We urge our readers to Bookmark this page or to subscribe to our Welding Site Blog RSS by clicking on the orange buttons under the NavBar in each Website page, to get immediate notice of every new published page. (www.welding-advisers.com)

You may also click periodically on the Welding Blog button in the NavBar.

Hardness Testing
made simple

If you think that this page might be useful, you are invited to forward it to a Friend.

If you received this page from a friend, please note that you can get at no cost every new issue of Practical Welding Letter, by Subscribing.

You will also receive a bonus book on Practical HARDNESS TESTING made simple.

You are invited to contribute from your thoughts and experience: visit our new page reachable by clicking on Welding Talk and typing or copying directly in the form.

Or just write a note and send it to us: Comments, Feedback and your Original Contributions! all are welcome.

To reach a Guide to the collection of the most important Articles from Past Issues of Practical Welding Letter, click on Welding Resources.

Site Map

Tig Welding Tips
Mig Welding Tips
Plasma Welding Tips
Flux Cored Arc Welding Tips
Submerged Arc Welding Tips
Shielded Metal Arc Welding Tips
Oxyacetylene Welding Tips
Vertical Welding Tips
Resistance Welding Tips

Bulletin_93 Top

See how could be A New Day
Watch the following Video...

Click on the following image to watch the SBI! TV Show!



Site Build It!

Click on this Logo NOW!

Copyright (©) 2014, by Elia E. Levi and
All Rights Reserved.